= Сообщение: 2427 из 7440 ============================================= IPV6 = От : Andrew Leary 1:320/219 10 Apr 16 21:25:17 Кому : Michiel van der Vlist 10 Apr 16 21:25:17 Тема : Tunnel FGHI : area://IPV6?msgid=1:320/219@fidonet+570b0220 На : area://IPV6?msgid=2:280/5555+570acfe4 = Кодировка сообщения определена как: CP437 ================================== Ответ: area://IPV6?msgid=2:221/6.0+570b43fa ============================================================================== Hello Michiel!
11 Apr 16 00:06, you wrote to Tommi Koivula:
MV> Hello Tommi,
MV> On Friday April 08 2016 09:02, you wrote to me:
>>> WinXP supports privacy extension. It is on by default. But there >>> is also the SLAAC address. If PE is enabled, it will use the PE >>> address for outgoing connections. But the machine will always >>> answer to the static address as well.
TK>> WinXP/2003 always uses the SLAAC address for outgoing by default,
MV> Not WinXP. Definitely not. The whole idea op PE it that it does NOT MV> use de SLAAC address (from which your MAC address can be gleened) by MV> default for outgoing, but the random PE address that chages every 24 MV> hours.
TK>> Listen on IPv6: Connect to IPv4: TK>> Address Port Address Port TK>> --------------- ---------- --------------- ---------- TK>> 2001:470:1f15:cb0:f1d0:2:221:0 24554 192.168.1.2 24554 TK>> 2001:470:1f15:cb0:f1d0:2:221:1 24554 192.168.1.2 24554 TK>> 2001:470:1f15:cb0:f1d0:2:221:0 23 192.168.1.2 23 TK>> 2001:470:1f15:cb0:f1d0:2:221:0 3141 192.168.1.2 3141 TK>> ===
MV> What is port 3141?
VMODEM, most commonly implemented on OS/2 systems using Ray Gwinn's SIO/SIO2K serial drivers.
Tommi is using the portproxy to forward IPv6 traffic for his OS/2 system(s) to the IPv4 address that OS/2 is actually using. I've considered doing something similar, as it would allow an IPv6 only node to connect to my OS/2 system, as long as the portproxy machine was up and running.