= Сообщение: 1730 из 7440 ============================================= IPV6 = От : Paul Hayton 3:770/100 02 Oct 15 12:20:35 Кому : Michiel van der Vlist 02 Oct 15 12:20:35 Тема : Re: Raspeberry Pi / SixXS FGHI : area://IPV6?msgid=3:770/100+47426291 На : area://IPV6?msgid=2:280/5555+560d0e5a = Кодировка сообщения определена как: CP866 ================================== Ответ: area://IPV6?msgid=1:261/38.20+560ee7e1 ============================================================================== On 10/01/15, Michiel van der Vlist pondered and said...
Mv> Using a Raspberry PI as an IPv6 router. Interesting experiment...
Yep!
Mv> I see more that one address, but they all start with 2001:4428:200:816c: Mv> Mv> In order to route IPv6 to your LAN, you do not just need a tunnel, you Mv> need a subnet as well. Have you ebnabled your subnet at SixXs yet?
Yes it comes with one by default
Mv> The tunnel and the subnet have different prefixes. The devices on the LAN Mv> should get addresses in the range that is assigned to the subnet, not Mv> that of the tunnel.
Understood and that's what the Pi should be issuing to the LAN clients
Mv> What does your configuration page on SixXs say about your address ranges?
The subnet range is a /64 range and the above address is the subnet one.
I realised I need to port forward using ip6tables traffic for binkd and I think I know how so will try and do this tonight.
Best, Paul
-- Agency BBS, New Zealand | bbs.geek.nz | telnet: agency.bbs.geek.nz:23
