Добро пожаловать, Гость. Пожалуйста авторизуйтесь здесь.

	Введите FGHI ссылку: Присутствуют сообщения из эхоконференции RU.UNIX.BSD с датами от 18 Jan 11 22:51:00 до 09 Aug 24 15:07:25, всего сообщений: 10761 Ответить на сообщение К списку сообщений Предыдущее сообщение Следующее сообщение = Сообщение: 7506 из 10761 ===================================== RU.UNIX.BSD = От   : Sergey Anohin                    2:5034/10.1        15 May 18 14:46:04 Кому : Eugene Grosbein                                     15 May 18 14:46:04 Тема : Re: aruba FGHI : area://RU.UNIX.BSD?msgid=2:5034/10.1+8dcbdbcb На   : area://RU.UNIX.BSD?msgid=grosbein.net+6edce066 = Кодировка сообщения определена как: CP866 ================================== ============================================================================== Hello, Eugene! EG> Без понятия, что имели в виду маркетологи в твоём случае, EG> вариантов масса - бывают гибридные диски HDD+SSD, бывают честные SSD, EG> бывает iSCSI over SSD. Я и так скажу что смарт у него какой-то хитрый, у обычного ссд вроде left time меняется, или это специальный TRUE SSD или СХД смарт скрывает. [root@webhosting2 ~]# smartctl -a /dev/sda smartctl 6.2 2017-02-27 r4394 [x86_64-linux-3.10.0-514.2.2.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family:     Intel 520 Series SSDs Device Model:     INTEL SSDSC2CW240A3 Serial Number:    CVCV249503UQ240CGN LU WWN Device Id: 5 001517 803d140d5 Firmware Version: 400i User Capacity:    240,057,409,536 bytes [240 GB] Sector Size:      512 bytes logical/physical Rotation Rate:    Solid State Device Device is:        In smartctl database [for details use: -P show] ATA Version is:   ACS-2 T13/2015-D revision 3 SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is:    Tue May 15 14:42:04 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status:  (0x00) Offline data collection activity                                         was never started.                                         Auto Offline Data Collection: Disabled. Self-test execution status:      (   0) The previous self-test routine completed                                         without error or no self-test has ever                                         been run. Total time to complete Offline data collection:                ( 2097) seconds. Offline data collection capabilities:                    (0x7f) SMART execute Offline immediate.                                         Auto Offline data collection on/off support.                                         Abort Offline collection upon new                                         command.                                         Offline surface scan supported.                                         Self-test supported.                                         Conveyance Self-test supported.                                         Selective Self-test supported. SMART capabilities:            (0x0003) Saves SMART data before entering                                         power-saving mode.                                         Supports SMART auto save timer. Error logging capability:        (0x01) Error logging supported.                                         General Purpose Logging supported. Short self-test routine recommended polling time:        (   1) minutes. Extended self-test routine recommended polling time:        (  48) minutes. Conveyance self-test routine recommended polling time:        (   2) minutes. SCT capabilities:              (0x0021) SCT Status supported.                                         SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE   5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0   9 Power_On_Hours_and_Msec 0x0032   000   000   000    Old_age   Always       -       931765h+35m+11.020s  12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1124 170 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0 171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0 172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0 174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       1124 184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0 187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1124 225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       2844472 226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       65535 227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       71 228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       65535 232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0 233 Media_Wearout_Indicator 0x0032   098   098   000    Old_age   Always       -       0 241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       2844472 242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       7108112 249 NAND_Writes_1GiB        0x0013   100   100   000    Pre-fail  Always       -       50682 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS     1        0        0  Not_testing     2        0        0  Not_testing     3        0        0  Not_testing     4        0        0  Not_testing     5        0        0  Not_testing Selective self-test flags (0x0):   After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [root@webhosting2 ~]# smartctl -a /dev/sdb smartctl 6.2 2017-02-27 r4394 [x86_64-linux-3.10.0-514.2.2.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family:     Intel 520 Series SSDs Device Model:     INTEL SSDSC2CW240A3 Serial Number:    CVCV23020234240CGN LU WWN Device Id: 5 001517 bb29dab8c Firmware Version: 400i User Capacity:    240,057,409,536 bytes [240 GB] Sector Size:      512 bytes logical/physical Rotation Rate:    Solid State Device Device is:        In smartctl database [for details use: -P show] ATA Version is:   ACS-2 T13/2015-D revision 3 SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is:    Tue May 15 14:42:10 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status:  (0x00) Offline data collection activity                                         was never started.                                         Auto Offline Data Collection: Disabled. Self-test execution status:      (   0) The previous self-test routine completed                                         without error or no self-test has ever                                         been run. Total time to complete Offline data collection:                ( 2097) seconds. Offline data collection capabilities:                    (0x7f) SMART execute Offline immediate.                                         Auto Offline data collection on/off support.                                         Abort Offline collection upon new                                         command.                                         Offline surface scan supported.                                         Self-test supported.                                         Conveyance Self-test supported.                                         Selective Self-test supported. SMART capabilities:            (0x0003) Saves SMART data before entering                                         power-saving mode.                                         Supports SMART auto save timer. Error logging capability:        (0x01) Error logging supported.                                         General Purpose Logging supported. Short self-test routine recommended polling time:        (   1) minutes. Extended self-test routine recommended polling time:        (  48) minutes. Conveyance self-test routine recommended polling time:        (   2) minutes. SCT capabilities:              (0x0021) SCT Status supported.                                         SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE   5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       1   9 Power_On_Hours_and_Msec 0x0032   000   000   000    Old_age   Always       -       934645h+58m+17.110s  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       11 170 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0 171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0 172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       1 174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       10 184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0 187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       10 225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       2311343 226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       65535 227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       22 228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       65535 232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0 233 Media_Wearout_Indicator 0x0032   099   099   000    Old_age   Always       -       0 241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       2311343 242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       653410 249 NAND_Writes_1GiB        0x0013   100   100   000    Pre-fail  Always       -       43475 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS     1        0        0  Not_testing     2        0        0  Not_testing     3        0        0  Not_testing     4        0        0  Not_testing     5        0        0  Not_testing Selective self-test flags (0x0):   After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. С наилучшими пожеланиями, Sergey Anohin. --- wfido * Origin: Отправлено из http://5034.ru/wfido (2:5034/10.1) К главной странице гейта

Powered by NoSFeRaTU`s FGHIGate
Открытие страницы: 0.108039 секунды