Добро пожаловать, Гость. Пожалуйста авторизуйтесь здесь.
FGHIGate на GaNJa NeTWoRK ST@Ti0N - Просмотр сообщения в эхоконференции FTSC_PUBLIC
Введите FGHI ссылку:


Присутствуют сообщения из эхоконференции FTSC_PUBLIC с датами от 13 Sep 13 18:57:24 до 01 Apr 24 01:17:44, всего сообщений: 7124
Ответить на сообщение К списку сообщений Предыдущее сообщение Следующее сообщение
= Сообщение: 4590 из 7124 ====================================== FTSC_PUBLIC =
От   : Andrew Leary                     1:320/219          01 Apr 19 05:26:40
Кому : Paul Hayton                                         01 Apr 19 05:26:40
Тема : SEEN-BY
FGHI : area://FTSC_PUBLIC?msgid=1:320/219@fidonet+5ca1d9bc
На   : area://FTSC_PUBLIC?msgid=3:770/100+a6941fd7
= Кодировка сообщения определена как: CP437 ==================================
Ответ: area://FTSC_PUBLIC?msgid=3:770/100+7dac4d06
==============================================================================
Hello Paul!

01 Apr 19 12:15, you wrote to all:

PH> Mark is saying that Mystic SEEN-BY lines may be incorrect in that at
PH> the start of each line he says there should be a reference to the NET
PH> like this example he gave.

PH> When James is back on deck I was going to feed this info back to him
PH> but wanted to do due diligence first and find FTSC docs that explain
PH> this requirement.

PH> At the moment I can't find anything except in FTS-0004 where there's a
PH> section about SEEN-BY but no mention of the need to start each line
PH> with a NET/NODE combo.

PH> Can someone point me to where I can reference this need and provide
PH> any commentary about this subject please?

http://ftsc.org/docs/fsc-0074.001 has this to say:

  3. Seen-by Lines

  Seen-by lines are the focus of EchoMail distribution control
  information.  They are used to determine which addresses
  (systems) have received messages.  There can be as many seen-
  by lines as required to store the necessary information.

  Seen-by lines consist of "SEEN-BY:<space>", followed by a list
  of net/node numbers corresponding to the systems which have
  received that message.  The net/node number of each system to
  which a message is exported is added to the seen-by lines at
  the time of export.

  There shall be exactly one set of seen-by lines in a message.
  Seen-by lines:

    -  Shall follow the origin line.

    -  Shall begin with the nine character literal: _

            SEEN-BY:<space>

    -  Shall contain a list of net/node numbers.

    -  Shall be no more than 80 characters long including the
       required literal.

  The complete lines might look like:

                       
  The list of net/node numbers:

    -  Shall identify at least one address. "Blank" seen-by
       lines shall not be transmitted.

    -  Shall be sorted in ascending net/node order.

    -  Shall not contain repeated node numbers.

    -  Shall use only "2D" net/node notation.

    -  May use short form address notation where a net number is
       listed once on any one line.  These 2 lines are
       equivalent:

                       
  Some implementations insert a Ctrl-A (0x01) immediately
  preceding the
  Six months after adoption of this document the ^ASEEN-BY:
  format shall be processed equally with the   when either occurs in received packets.
_

The critical phrase is:  "May use short form address notation where a net
number is listed once on any one line."

My interpretation is that the net number must be listed at least once on any
one SEEN-BY line.

Regards,

Andrew

--- GoldED+/LNX 1.1.5-b20180707
* Origin: Phoenix BBS * phoenix.bnbbbs.net (1:320/219)

К главной странице гейта
Powered by NoSFeRaTU`s FGHIGate
Открытие страницы: 0.051065 секунды