= Сообщение: 7233 из 7402 ============================================= IPV6 = От : deon 3:633/509 04 Apr 23 07:31:29 Кому : Rob Swindell 04 Apr 23 07:31:29 Тема : Connection Tests FGHI : area://IPV6?msgid=1585.fdn_ipv6@3:633/509+289081e2 На : area://IPV6?msgid=6.ipv6@1:103/705+28904464 = Кодировка сообщения определена как: CP437 ================================== ============================================================================== Re: Connection Tests By: Rob Swindell to deon on Mon Apr 03 2023 10:35 am
> I've never used the ISP's router's port blocking/forwarding/NAT/gateway > features before (for IPv4), so now I'm looking what it supports. It does > have DHCPv6 and DHCP-PD was disabled, so I've enabled that and expecting for > it to hand out addresses in the range: > > 2600:6c88:8c40:5b::1 to ::1000 (according to its default configuration) > > I haven't seen that happen yet. I'm guessing this means I have been > allocated a /64 (?). > > Looks like I have control: > https://1drv.ms/i/s!ApZPvWcrEaRQ5_wrKOnYR4bZu_jJ3Q?e=8f5cy5
So this looks like the "lan side" of your network. The uplink side should show you what prefix you were allocated. It's possible that your router "requested" a segment (internally), allocated it self ...:5b: and the dhcp-pd is then allocating that out as you have shown. You may need to be running a dhcpv6 client on systems to get allocated an address.
If you change it to stateless/SLAAC, then hosts should allocate their own address at will (without a dhcp client). But nothing in your diagram showed firewalling control, and it may be that anything in the "DMZ" is accessible inbound and everything else is not?
...δεσ∩ --- SBBSecho 3.15-Linux * Origin: I'm playing with ANSI+videotex - wanna play too? (3:633/509)
