= Сообщение: 7342 из 7402 ============================================= IPV6 = От : Nicholas Boel 1:154/700 08 Oct 23 07:47:33 Кому : Michiel van der Vlist 08 Oct 23 07:47:33 Тема : My FTTH and IPv6 FGHI : area://IPV6?msgid=2401.ipv6@1:154/700+2987e446 На : area://IPV6?msgid=2:280/5555+6521c707 = Кодировка сообщения определена как: ASCII ================================== Ответ: area://IPV6?msgid=2:280/5555+652313b0 ============================================================================== Re: My FTTH and IPv6 By: Michiel van der Vlist to Nicholas Boel on Sat Oct 07 2023 10:51 pm
MV> 1) In my case that is not an option at the moment. The modem/router combo MV> they gave me does not support bridge mode.
While it includes most if not all information you already know, this stands out as something that may need to be done:
"Sometimes you need to directly contact your ISP, though, to have them set your ISP-supplied router to bridge mode."
This is what I did. I didn't change any setting on my modem/router myself, my ISP did.
What is the model number? Maybe there's something else you could do that wouldn't require you to open your wallet.
MV> 2) Their network technology is relatively new (XSG-PON). A simple ONT that MV> works with their network, so that I can bypass their hardware completely, MV> is not available yet. So I am stuck with their modem/router.
MV> 3) Having said that: Even a provider supplied modem/router should support MV> something basic as IPv6 pinholing. Especially if I am stuck with it.
I looked up this XSG-PON and it seems to show some routers with 6 and 6E technology. Does yours have all this newer tech? If so, I would fully agree that their supplied hardware should support IPv6 fully, not just basic. The router I'm using is 9+ years old (Asus AC68R, released in 2014), doesn't have wifi6 or 6e tech, and still uses the AC and N bands where most things nowadays are AX, and this thing *still* fully supports IPv6.
MV> 4) Just for the record, incoming IPv6 works if I disable the firewall. I MV> tested that. No need to say that permanently disabeling the firewall is MV> not an option.
So, your ISP supports IPv6, your modem seems to work with/support IPv6, but the router inside that same modem doesn't? Something seems fishy here. Is there any firmware upgrades available for said hardware? Or maybe even different firmware available for it?
Then maybe you don't need a completely new router, but instead you may be able to disable the firewall and use some kind of software based firewall like pfSense (or some well known windows firewall since you don't use Linux) in it's place? Either way, I'm sure there's some options, but it's more what you are willing to do about it, and/or if you want to go that far.
Regards, Nick
... If you don't go to people's funerals, they won't come to yours. --- SBBSecho 3.20-Linux * Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (1:154/700)
